OPTOKON

LS-800 – Light Source

LS-800 – Light Source

The LS-800 is OPTOKON test equipment designed for thorough fiber line diagnostics. The light source is available in various wavelengths. The model with one or two outputs with two light sources on each port provides a maximum of 4 wavelengths in one device. The changeable adaptor design allows the simple exchange of optical connectors according to actual needs. 
Automatic wavelength detection
The automatic wavelength detection (AWD) mode enables to use the OPTOKON Light Source and Power Meter without manually switching the measured wavelength and prevents faulty measurement. 
Cycle mode
The cycle mode allows the device to automatically toggle between available wavelengths.

  • TE-ALS-FC FC output adaptor
  • TE-ALS-SC SC output adaptor
  • TE-ALS-ST ST output Adaptor
  • TE-HC-03 Hard carrying case
  • Standalone up to 4 channel light source
  • Modulation CW, 270 Hz, 1 kHz, 2 kHz
  • Auto Wavelength Detection mode
  • Changeable output adaptors
  • Auto Off feature, Cycle mode

General specifications

Value

Unit

Note

Dimensions

165 x 80 x 40

mm

with TE-ASP-FC adapter

Weight

340

g

with battery

Operation temperature

-10 to + 50

°C

 

Storage temperature

-40 to + 70

°C

 

Humidity (non-condensing)

0 to 95

%

 

Light source specifications:

Code marking

Wavelength [1] [nm]

Output power [2] [dBm]

Stability[dB]

Note

650

650

0

N/A

Visible light

850

850

0

± 0.03 dB

Multimode fibers testing

30

1300

0

± 0.05 dB

31

1310

0

± 0.05 dB

Single mode fibers testing

49

1490

0

± 0.05 dB

55

1550

0

± 0.05 dB

62

1625

0

± 0.05 dB

[1] Additional wavelengths are available on request
[2] Output power for dual wavelength port is 3 dB lower

Output adapters 

TE-ALS-FC

TE-ALS-SC

TE-ALS-ST

CASE TE-HC-03

 

  • Link Loss Characterization
  • Fiber Detection
  • Continuous fiber testing
  • Visual fault locator

LS-800

-

XX

-

XX

-

P1S1-P1S2/P2S1-P2S2

 

 

 

 

 

 

 

 

 

 

 

 

P2

2.5/PC

 

Adaptor

 

P1S1

port 1, Wavelength 1

 

 

A2

2.5/APC

 

ST

P2

 

P1S2

port 1, Wavelength 2

 

 

 

 

 

SC

P2,A2

 

P2S1

port 2, Wavelength 1

 

 

 

 

 

FC

P2,A2

 

P2S2

port 2, Wavelength 2

 

 

 

 

 

NC

Without adaptor

 

Select code from transmitter

 

 

 

 

 

LC

Fixed adaptor LC/PC

 

specifications table above

 

 

 

 

 

NLC

Fixed adaptor LC/APC

 

 

 Standard models:

LS-800-P2-FC-850-30/31-55

FC adaptor, Port1: 850 nm + 1300 nm laser, Port2: 1310 nm + 1550 nm laser

LS-800-P2-FC-31

FC adaptor, port1: 1310 nm laser, 

LS-800-P2-SC-55

SC adaptor, Port1: 1550 nm leaser

LS-800-P2-SC-850-30/31-55

SC adaptor, Port1: 850 nm Laser + 1300 nm leaser, Port2: 1310 nm + 1550 nm laser