OPTOKON

Data Network Equipment

OPTOKON, işletmeleri son derece uygun maliyet ve kolay data network ekipmanları serisinin kullanımını birleştirir. Geniş ürün gamını üstün değer, yüksek performans ve olağanüstü güvenilirlik sağlar. OPTOKON, şirketlerin fiyat performans oranlarını artırmasına ve sanallaştırılmış ortamlarda data yönetimini geliştirmesine yardımcı olur ve özel olarak tasarlanmış data network ürünleri üretir.

QSFP CWDM Transceivers S40-QP-LR4-D

The S40-QP-LR4-10-D is designed to operate over single-mode fiber system using 4x10G CWDM channel in 1310 band and links up to 10km. The module converts 4 inputs channel of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data

QSFP Transceivers M40-V85-QP-SR4-XX-D

The M40-V85-QP-SR4-XX-D is designed to operate over multi-mode fiber system using 4x10G channels in 850 nm. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4. The optical transmitter portion of the transceiver incorporates a 4-channel VCSEL (Vertical Cavity Surface Emitting Laser) array, a 4-channel input buffer and laser driver, diagnostic monitors, control and bias blocks. For module control, the control interface incorporates a Two Wire Serial interface of clock and data signals. 

QSFP CWDM Transceivers S40-QP-LR4-XX-D

The S40-QP-LR4-XX-D is designed to operate over single-mode fiber system using 4x10G CWDM channel in 1310 band and links up to 30km. The module converts 4 inputs channel of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.

Active Optical Cable – 40 Gbs QSFP+

Products developed the QSFP+ Active Optical cable to provide an affordable, high-performance, low power approaches when connecting point-to-point or rack-to-rack. Parallel AOC are using full duplex 4 channel 850nm VCSEL technology. The QSFP+ to QSFP+ AOC provide data rates of up to 40 Gbps (Up to 11.1Gbps data rate per channel). Maximum link length is 300m links on OM3 multimode fiber.
AOC is electrically hot-pluggable compliant to SFF-8431, QSFP+ MSA and RoHS. Power dissipation < 1.5 W (per cable end).