PM-4212 – Compact 4 port optical power meter
The PM-4212 is a 4 port portable optical power meter. The small size does not prevent the optical power meter fulfilling the operational requirements of a full size tester.
The power meter is designed for simultaneous measurement of up to 4 single mode or multimode fibers. All four input interfaces are fitted with 1mm InGaAs photo detectors, with changeable ADP adapters for a wide range of single mode and multimode fiber connectors.
The tester can be used as standalone power meter or as part of a testing workstation. Communication with control software is through the USB port or an Ethernet network.
- Power meter
- FC input adapter (TE-ADP-FC)
- USB cable
- Calibration certificate
- _________________
- Optional accessories
- Power charging adapter 220 V AC/5 V DC
- Hard carry case TE-HC-01
- Stand-alone power meter
- USB probe – accessory for testing workstation
- Ethernet probe – accessory for testing workstation
- Small size, lightweight
- 4 channel power meter
- Aluminum case
- SM & MM fiber testing
- Easy changeable connectors for wide ranging applications
- Absolute and Relative optical power measurement
- Ethernet RJ-45 port and USB port:
- for full control via simple commands
- USB port:
- for firmware upgrade
- for charging the battery
- Built-in Li-Pol rechargeable battery
- Battery status indicator, Auto Off
Ethernet port
The PM-4212 power meter series is assembled with a 10/100 Mbps Ethernet port for connection to the local area network. In combination with software the operator can remotely control and measure the network or periodically monitor the link status.
|
Power Meter |
Value |
Unit |
Note |
|
Photo detector |
1 |
mm |
InGaAs |
|
Working wavelengths |
850, 1300, 1310, 1490, 1550, 1625 |
nm |
|
|
Dynamic range |
-60 to +10 |
dBm |
1300, 1310, 1490, 1550, 1625 nm |
|
-53 to +17 |
dBm |
850 nm |
|
|
Uncertainty |
± 5 |
% |
1310, 1550 nm at -20 dBm |
|
Resolution |
0.01 |
|
|
|
General specifications |
Value |
Unit |
Note |
|
Dimensions |
100 x 105 x 40 |
mm |
with TE-ADP-FC adapter |
|
Weight |
340 |
g |
with battery |
|
Operation temperature |
-10 to + 50 |
°C |
|
|
Storage temperature |
-40 to + 70 |
°C |
|
|
Humidity (non-condensing) |
0 to 95 |
% |
|
|
Battery working time |
100[1] |
Hours |
3200 mA/h Li-Pol |
[1] Without Ethernet module
1) Without Ethernet module
Input adapters
|
|
|
|
|
|
TE-ADP-FC |
TE-ADP-LC |
TE-ADP-SC |
TE-ADP-250 |
Additional adapter types are available on request
|
|
|
|
|
PM-4212 |
Compact 4 port optical power meter with TE-ADP-FC adaptor |
|
TE-ADP-SC |
SC adapter |
|
TE-ADP-FC |
FC adapter |
|
TE-ADP-ST |
ST adapter |
|
TE-ADP-LC |
LC adapter |
|
TE-ADP-250 |
Universal 2.5 mm adapter |
