CS-1000C Mini size 1G media converter
                    
                The CS-1000C series are small size Gigabit Ethernet - fiber converters designed to be media interfaces between 10/100/1000Base-T Ethernet copper pairs cable and 1000Base-X fiber optics cable. They feature a RJ-45 connector, and a pair of fiber optic connectors. The Gigabit Fiber Converters give you the freedom to extend your 10/100/1000 Mbps cabling distance by allowing connectivity 2 kilometers for multimode optical fiber and 20 kilometers using single mode optical fiber. 
LED indicators signal the power status of the converter, the Ethernet port and the FX port activity.
 
- 1000BASE-X Fiber to 10/100/1000BASE-X UTP Converter
 - Single mode and multimode application
 - LED signalization
 - Flow control enable / disable
 - Jumbo frame 9K support
 - Auto-Cross over for MDI/MDIX in TP port
 - Auto-Negotiation or Manual mode in TP port
 - Support Link Fault Pass Through (LFP) Function
 
| 
			 Standards  | 
			
			 IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T 802.3z 1000Base-X  | 
		
| 
			 Packet length  | 
			
			 Jumbo frame 9K support  | 
		
| 
			 Mode  | 
			
			 Store and Forward Switch Mode1  | 
		
| 
			 Fiber Cable  | 
			
			 Multimode: 50/125, 62.5/125 µm Single mode: 9/125 µm  | 
		
| 
			 Fiber Connector  | 
			
			 Duplex SC  | 
		
| 
			 UTP Connector  | 
			
			 RJ-45  | 
		
| 
			 LED Display  | 
			
			 PWR TPL LINK/ACT, 1000 Fiber LINK/ACT  | 
		
| 
			 Dimensions  | 
			
			 50 x 69 x 25 mm  | 
		
| 
			 Weight  | 
			
			 100 g  | 
		
| 
			 DC Power Input Connector  | 
			
			 DC, 5 to 12 V, 5.5*2.1 mm  | 
		
| 
			 Output of AC/DC Power Adaptor  | 
			
			 1 A @ 5 V DC  | 
		
| 
			 MTBF  | 
			
			 More than 50 000 hours, in accordance with the standard of telecom operation  | 
		
| 
			 Temperature Operation  | 
			
			 0 to +50 ºС  | 
		
| 
			 Temperature Storage  | 
			
			 -40 to +85 ºС  | 
		
| 
			 Humidity  | 
			
			 5 to 95% not condensing  | 
		
| 
			 RoHS compliant  | 
			
			 
  | 
		
Note: 1 Set by switch
CS-1000C-S31-20-DC    1G converter single mode 1310 nm, 20 km distance
CS-1000C-M30-02-DC    1G converter multimode 1300 nm, 2 km distance 2
 
DIP switch setting
ON (downward)     OFF (upward) 
SW1     Enable Link Fault Pass -Through     Disable Link Fault Pass -Through 
SW2     Forward 9K data packets     Store and forward 
SW3     Flow control enable     Flow control disable 
SW4     Ethernet Speed 100 Mbps     Ethernet Speed 1000 Mbps 
Note: 2 Depends on cable type