OPTOKON

MOMB series Outdoor metal fiber optic box, IP66

The OPTOKON MOMB metal box is designed for optical fiber cables termination outdoors. It is an IP66 design that resists moisture and dust entry. A single door box with lock is provided. Provision for up to 4 optical fiber cables to enter or leave the enclosure through weatherproof cable glands is provided. Four cable anchoring points are provided. The MOMB includes a set of individually removable splice trays according to the customer request; each tray can accept 12 fusion splices. The splice tray stack is secured by a long length hook and loop tie. The housing contains standard CNPM coupling panels with connector adaptors of all most industry used standards.

MOTB-X24A Termination Box

Widely used in FTTH access network.
Telecommunication Networks
CATV Networks
Data communications Networks
Local Area Networks

MOTB-X30 Termination Box

The MOTB-X30 termination box is designed to be used in distribution nodes of FTTH network, MDU building cabinet for example. It allows termination of optical cable by splicing of pigtails, including connection passive optical splitters 1:4, 1:8 and 1:12 into passive fiber optic infrastructure. The ruggedized box is designed for both indoor and outdoor applications.
The MOTB-X30 box includes a holder for SC (DLC) type coupling adapters and splice cassette for heat shrinkable or mechanical splice protection sleeves and holder for passive splitter. Provision for 2 (MOTB-X30B) or 3 (MOTB-X30A) optical fiber cables to enter and 12 smaller entries to leave the enclosure through weatherproof cable glands is provided. Outlet ports allow installation of 24 connectorized patchords.

MOTB-X12 Termination Box

MOTB-X12 is designed for the FTTH application and widely used in Telecommunication networks, CATV Networks, Data communications networks and Local area networks. MOTB-X12 is suitable for wall-mounting and pole-mounting.

MOTB-002 Indoor Termination Box

Termination box MOTB-002 suits for jointing fibers with fiber pigtail and it protects fiber optic splices and helps to distribute. The termination box is either a wall-mounting type or desktop type, which is mainly used in telecommunication equipment room and network equipment room. Termination box MOTB-002 is suitable to connect the drop cables to the raiser fibers splices. It is also suitable to connect cable and pigtails.The termination box is for indoor wall mounting. MOTB-002 is applicable for splicing 2 pieces of fiber cable with max. diameter Ø16mm.

MOTB-Y24A Termination Box

Multipurpose fiber optic distribution-termination box MOTB-Y24A is designed to provide a flexible platform to address the multitude of applications that exist in residential and commercial FTTx installations. Can deliver with pre-installed SC adapters. Easy to install and is capable of being mounted directly to standard electrical junction boxes or directly to wall. The box interior can be configured to address slack storage, splicing, cross connect, hardened adapter applications or any combination. The Distribution box kit includes all the necessary accessories –parts for complete box installation.

MOTB-X48A Termination Box

The MOTB-X48A distribution box is designed to be used in distribution nodes of FTTH network, MDU building cabinet for example. It allows termination of optical cable by splicing of pigtails, including connection passive optical splitters 1:8, 1:16, 1:32 into passive fiber optic infrastructure. The ruggedized box is designed for both indoor and outdoor applications. The MOTB-X48A box includes a holder for SC type coupling adapters and splice cassette for heat shrinkable or mechanical splice protection sleeves and holder for passive splitter. Provision for 2 optical fiber cables to enter and 12 smaller entries to leave the enclosure through weatherproof cable glands is provided. Outlet ports allow installation of 48 connectorized patchords.

MOTB-X04 Wall mount Distribution Box

The MOTB-X04 small distribution box is designed to be used in distribution nodes of FTTH network, floor cabinet for example. It allows termination of optical cable by splicing of pigtails, including connection passive optical splitters 1:4 into passive fiber optic infrastructure. The ruggedized box is designed for both indoor and outdoor applications.
The MOTB-X04 box includes a holder for SC (DLC) type coupling adapters and splice cassette for heat shrinkable or mechanical splice protection sleeves and holder for passive splitter. Provision for optical fiber cable to enter and 4 smaller entries to leave the enclosure through weatherproof cable glands is provided. Outlet ports allow installation of 4 / 8 connectorized patchords.

MOTB-X20 Wall mount Distribution Box

The MOTB-X20 termination box is designed to be used in distribution nodes of FTTH network, MDU building cabinet for example. It allows termination of optical cable by splicing of pigtails, including connection passive optical splitters 1:16 into passive fiber optic infrastructure. The ruggedized box is designed for both indoor and outdoor applications.
The MOTB-X20 box includes a holder for SC (DLC) type coupling adapters and splice cassette for heat shrinkable or mechanical splice protection sleeves and holder for passive splitter. Provision for 2 optical fiber cables to enter and 16 smaller entries to leave the enclosure through weatherproof cable glands is provided. Outlet 16 ports are intended for outgoing drop cables or patchords.
 

MOTB-008 Wall-mounting Termination Box

Termination Box MOTB-008 is suitable for jointing fiber cable and pigtail, and it protects fiber optic splices and helps to distribute. The termination box is a wall-mounting type.

MOTB-C01 Termination Box

The termination box MOTB-C01 is designed for access of outdoor optical cable and drop cable with lockable protection from outdoor environment, specialty for FTTH, Telecommunication and CATV application.