OPTOKON

FP – Front Panel

The FP front panel introduces a low cost solution for fiber optic cable termination. The modular design can accept wide range of optical fibers capacity with various connector types.

OFMP - Fiber Management Panel

The OFMP is a rack mountable panel with brackets for easy vertical cable routing.

MK-1 and MK-2 Mounting Kit

The MK-1 Mounting kit contains:

  • 8x cable tie 100 x 2.5 mm 
  • 2x cable tie 190 x 4.8
  • 4x cable guide
  • 0.8 m wrapping spiral 6/8
  • 0.8 m wrapping spiral 10/11
  • Manual

Ordering Code:    MK-1
 

The MK-2 mounting kit contains:

  • 8x cable tie 100 x 2.5 mm
  • 2x cable tie 200 x 4.6 with the narrower profile (designed for TMVJ, ZMPJ cabinets)
  • 4x cable guide
  • 0.8 m wrapping spiral 6/8
  • 0.8 m wrapping spiral 10/11
  • Manual

Ordering Code:    MK-2
 

 

UHV – Vertical Unit Holder

The UHV unit holder combines the standard unit holder and patchcord organizer thus allowing vertical cable organization.

UH-X – Unit Holder

The unit holder is designed to hold whole ODF in the 19” rack

CH-X – Cable Holder

The cable holder is designed to ensure right position of cable inside ODF

KNS-12 Splice trays

The splice trays are designed for installation into the OPTOKON system of optical rack mount distribution frames and wall mount optical boxes. The splice trays are equipped with fixed internal fiber bend radius protectors, which allow storage and organization of spare fiber, both primary 250 µm and 900 µm coating. The KNS-SH-D splice holders can be used in the splice cassettes, designed for standard heat shrinkable protection sleeves.  The capacity depending on outer diameter of protection sleeves  after heating is 6 to 12 splices. The KNS-12S stackable series allows installation hinges at the sides of the cassette, which are designed for opening the block of cassettes and enabling easy access to the spliced fibers during fiber optic systems operation. The lid – optional accessories for each cassette type can be used to cover a single or block of cassettes.

GK- Grounding Kit

Grounding kit is designed for ensuring proper conductive connection of all ODF metal parts with grounding rod to prevent even dangerous difference of potential and consequently to avoid human injury or device damage…

Due to this reason, there is a possibility to provide grounding wires by using /G option in ordering code of ODF

CAPM cassettes

The OPTOKON CAPM cassette offers a convenient and much more reliable alternative to unprotected pigtail splicing or field termination. The CAPM cassettes accept passive fiber optic components such as attenuators, couplers/splitters, WDM and CWDM multiplexers, filters, circulators and many other networking devices. As the fiber optic components have been installed into the CAPM cassettes it is possible to include them into fiber optic networks by using the standard system of Optical Distribution Frames without  any need for special distribution frames.

CNPM coupling panels

OPTOKON fiber optic coupling panels CNPM are manufactured from aluminum sheet metal and accommodate most common fiber optic couplings and hybrid adapters. OPTOKON offers a series of high density coupling panels that fit all OPTOKON´s fiber management products. These coupling panels are available with a variety of standard coupling styles in 6 and 8 counts. Custom coupling panels can be designed to suit your needs.
 

OPK-09, OPK-13, OPK-25 Optokryt – cable protection cover

The Optokryt – cable protection cover is designed for optical cable installation. It includes cable tube for protection of optical cable during installation and header, which serves for pulling of tube with optical cable. The optical cable is fixed by the help of cable gland with appropriate diameter to the protection tube of the Optokryt. 

WST.HT – Compact Splice Tray

2U Half Rack module to carry up to 3 SMPTE connectors (18 cm depth)
EXCLUSIVELY DEVELOPED FOR LEMO

The new WST.HT-Compact Splice Tray offers users the ability to quickly and easily install a space saving and robust HD video bulkhead interface solution without compromising performance.
Being modular by design, this versatile system can be easily configured to specific application
requirements and therefore quick turn-around bespoke solutions can be easily supported.
The WST.HT 2U Half Rack cabinet uses a reduced depth of 18 cm while maintaining its full functionality.
With each system accommodating up to four SMPTE 311M hybrid fibre (HD) camera cables / LEMO 3K.93C SMPTE 304M bulkhead connector interfaces, it is ideal for mobile production and studio applications. By means of a portable automatic fusion splicer it can be field terminated, making it suitable for projects where application constraints prohibit the use of pre-terminated camera cables.