OPTOKON

Datové sítě - SFP moduly, aktivní prvky

OPTOKON nabízí cenově efektivní a snadno použitelná zařízení a prvky pro moderní optické datové sítě. Široký sortiment našich produktů poskytuje vysoký výkon a mimořádnou spolehlivost. Produkty pro datové sítě jsou speciálně navržené tak, aby pomohly společnostem zlepšit poměr cena výkon a zlepšit správu dat ve virtualizovaných prostředích.

CSFP Transceivers – 1.25 & 3.072 Gbps

OPTOKON’s transceivers are compatible with the Compact Small Form- Factor Pluggable (CSFP) Multi-Source Agreement (MSA) option 2, The transceiver consists of 2-channel Bi-directional Optical Transceiver unit with five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, type of laser (the DFB laser) and the PIN photo-detector. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. Conventional SFP will function when plugged into a C-SFP socket, at the same time no damage to C-SFP and host board if C-SFP module is plugged into a conventional SFP socket
 

CFP2 Transceivers - 100 Gbps

OPTOKON CFP2 transceivers is designed for high speed communica¬tion applications that requiring rates of from 103.125 to 111.81 Gbps. The transceiver converts 4 inputs channel of 25.78 to 27.95 Gbps electrical data to 4 CWDM optical signals, and multiplexes them into a single channel through an industry standard LC connector. CFP2 transceiver has the Digital Diagnostic Monitor Feature.

CFP4 Transceivers - 100 Gbps

OPTOKON CFP4 transceivers is designed for high speed communica¬tion applications that requiring rates of from 103.125 to 111.81 Gbps. The transceiver converts 4 inputs channel of 25,78 Gb/s to 27.95 electrical data to 4 CWDM optical signals, and multiplexes them into a single channel through an industry standard LC connector. CFP4 transceiver has the Digital Diagnostic Monitor Feature.