OPTOKON

SFT-TAP Test Access Point splitter

SFT-TAP Test Access Point splitter

The OPTOKON SFT-TAP splitter is designed for optical network monitoring during operation. According to the operatotor request it allows bi-directional or uni-directional monitoring of optical fiber in full CWDM wavelength range. The splitting ratio of TAP port can be customized in 1% – 50% rate. Wide range of the packaging types allows easy implementation into optical network which would be monitored. The SFT-TAP splitter can be installed directly into the system of optical distribution frames or delivered separately in boxes according to the operator demand.

  • Passive access to fiber optic network
  • Protocol and transmission speed independent
  • High port isolation
  • Custom defined specifications
  • Environmentally stable
  • Wavelength independent - full CWDM spectrum
  • Up to 16 TAP modules in 1U rack mount cconfiguration

ITEM

Test Access Point splitter

Operating Wavelength, nm

1270 – 1630 (CWDM wavelength range)

Thermal Stability, dB (peak-peak)

< 0.2

PDL, dB

< 0.15, PDL free (< 0.05) – on request

Port Configuration

2 x 2 or 2 x 1

Coupling Ratio

1:99 to 10:90, (on request other)

Insertion Loss1), dB

Refer to the coupling ratio vs. Insertion loss chart

Directivity, dB

> 50

Return Loss, dB

> 50

Operating Temperature2), °C

-40 to +85

Storage Temperature2), °C

-50 to +85

WARNING

This product should never be installed in an optical
network handling above Class I emissions

Note:    1) Without connectors
            2) Conditioned by the cable type

 

Block diagram:

Coupling Ratio vs. Insertion Loss: AT

Coupling Ratio (%)

Insertion Loss (dB)

1 /99

24.3 / 0.2

10 / 90

12.0 / 0.7

30 / 70

6.2 / 1.9

50 / 50

3.6

 Packaging variants:

 

SFT-TAP-AT-10-CM1-NC

 

SFT-TAP-D-10-CAPM-ULCD

TAP-D configuration

Internal connection

Front panel marking

SFT-6xTAP-D-30-ZMPJ-NLC

SFT

-

TAP

-

XXXX

-

XX

-

XXX

-

NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Type

Wavelength

 

 TAP ports

 

 

 

 No input and output connectors3)

 TAP1)

1270 - 1630 nm

 

 AT

 

 

 

 Connector type - according to CON_14-01

 

 

 

 D duplex AT

 

 

 

 

 (Jumper Ordering Code)

 

 

  

 

 

 

 

   

 

 

 

 

 

 

 

 Package option I

 

 

 

 

 

 

 

 FM1

 Fiber type, metal box 100x15x9 mm

Note:

 Coupling ratio

 

 CM1

 Cable type, metal box 100x15x9 mm

1) ±0.3 dB typ. tolerance A↔B

01

1/99

 

 FM3

 Fiber type, metal box 100x80x10, stackable

   (1370, 1390, 1410 nm IL increased for 0.2-0.3 dB)

10

10/90

 

 CM3

 Cable type, metal box 100x80x10, stackable

2) Optional according to requirements

30

30/70

 

 

3) Standard fiber/cable length = 1 m

50

50/50

 

 Package option II

 

   Other2)

 

 XXX :  Part number of relevant ODF (e.g. MCNP, TMVJ, ZMPJ)

 

 

 

 

 CAPM

 OPTOKON cassette

 

 

 

 MPIC

 Wall mount MPIC unit