OPTOKON

PM-800 Optical Power Meter

PM-800 Optical Power Meter

The PM-800 is a part of OPTOKON test equipment designed for thorough fiber line diagnostic. It is designed to measure absolute or relative optical power in optical networks. It can be used as portable power meter or as a USB probe. The changeable adaptor design allows the simple exchange of optical connectors according actual need.
Automatic wavelength detection
Automatic wavelength detection (AWD) mode allows using OPTOKON Light source and Power meter without manually switching the measured wavelength and decreases the possibility of faulty measurement.
Cycle mode
Cycle mode allows the device to automatically toggle between available wavelengths.
 

 
 
  • Power meter
  • Universal 2.5 mm testing adaptor
  • USB cable
  • NiMH batteries
  • Power charging adapter 220 V AC/5 V DC
  • Calibration certificate
  • Hard carrying case
  • Smart Protocol PC software
  • Data Exporter PC software
  • Standalone Power meter
  • InGaAs or Si photo detector
  • CW, 270 Hz, 1 kHz, 2 kHz Modulation
  • Auto Wavelength Detection(AWD) mode
  • Changeable input adaptors
  • Absolute and relative optical power measurement
  • Cycle mode
  • USB probe mode
  • Two levels high capacity memory

General specifications

Value

Unit

Note

Dimensions

165 x 80 x 40

mm

With TE-ADP-250 adapter

Weight

340

g

With battery

Operation temperature

-10 to + 50

°C

 

Storage temperature

-40 to + 70

°C

 

Humidity (non-condensing)

0 to 95

%

 

Power Meter

PM-800

PM-800SI

Unit

Note

Detector

InGaAs

Si

 

 

Detector size

1

3.6

mm

 

Wavelength range

850 to 1625

650 to 850

nm

 

Calibrated wavelengths

850, 1300, 1310
1490, 1550, 1625

650, 850

nm

 

Dynamic range

-65 to +101

-40 to + 10

dBm

 

Uncertainty

± 5

 

%

1310, 1550 nm at -20dBm

Resolution

0.01

 

-

 

Tone detection

0.270, 1, 2

0.270, 1, 2

kHz

 

Auto switching (AWD)

Yes

Yes

-

 

Data storage

Up to 3000

Up to 3000

-

Number of measurements

AWD/Modulation Detection

-50 / -45

 - / -45

dBm

1300 – 1625 nm / 850 nm

Display units

dBm, dB, W

dBm, dB, W

-

 

 
PM-800 Optical Power Meter
  • Link Loss testing
  • Measurement of optical power
  • Output power of transceivers
  • Fiber Detection
  • Continuous fiber testingv
  • Signal detection
  • USB probe
 
 
 

PM-800

Standard power meter with InGaAs photo detector, SM fiber

PM-800SI

Standard power meter with Si photo detector, MM fiber

 

Accessories

 

TE-ADP-FC

FC output adaptor

TE-ADP -LC

LC output adaptor

TE-ADP –SC

SC output adaptor

TE-ADP-250

2.5 mm universal adaptor

TE-ADP-125

1.25 mm universal adaptor

TE-HC-03

Rigid carrying case

 

1) PM-800: Dynamic range for 850 nm is from -57 to +17 dBm