OPTOKON

PM-215E

The PM 215E optical power meter is a small, pocket-size low-cost item. The small size does not prevent the optical meter fulfilling all technical requirements for field equipment. The tester can be used as pocket power meter or as USB probe, part of testing workstation.  It can be placed within rack mount ODF’s with the display on the top or on the side. The Li-Pol rechargeable battery ensures long-term working time with a minimum life time of 2 years. The unit is able to store measurement data which can be uploaded to PC. The backlight function of the display facilitates the reading of measured data in poor lighting conditions 

PM-212 Pocket optical power meter - USB probe

The PM 212 optical power meter is a small, pocket size low cost item. The small size does not prevent the optical meter fulfilling all technical requirements for field equipment. The tester can be used as pocket power meter or as USB probe, part of testing workstation.  It can be placed within rack mount ODF’s with the display on the top or on the side. The Li-Pol rechargeable battery ensures long term working time with a minimum life time of 2 years. The unit is able to store 100 measurements which can be uploaded to PC and managed with SmartProtocol software or Data Exporter.

PM-212-MPO Pocket optical power meter USB probe

The PM-212-MPO optical power meter is a small, pocket size low cost item. The small size does not prevent the optical meter fulfilling all technical requirements for field equipment. The tester can be used as pocket power meter or as USB probe, part of testing workstation. The unit can be easily carried in the pocket or on the belt. 
There are two versions for simultaneous measurement:
12/24 multifiber MPO/MTP connectors
16/32 multifiber MPO/MTP connectors

The Li-Pol rechargeable battery ensures long term working time with a minimum life time of 2 years. The unit is able to store 100 measurements which can be uploaded to PC and managed with SmartProtocol software or Data Exporter.

PM-212-MTP-GE Multifiber optical power meter

The PM-212-MTP-GE optical power meter is designed to measure absolute or relative optical power in optical networks terminated with multifiber MTP/MPO connectors. Because of use the large scale Ge photodiode the tester can measure overall optical power level from all fibers of MTP/MPO connectors in wide wavelength range. 
There are two versions for simultaneous measurement:
12/24 multifiber MPO/MTP connectors
16/32 multifiber MPO/MTP connectors

The memory capacity allows storage and uploading of up to 100 measurements including memory position or fiber number, wavelength, absolute value or relative value and insertion loss. The SmartProtocol PC evaluation software supports memory download, test report generation and Data Exporter for data download to Excel sheet.
The rechargeable battery ensures long term working with a minimum service life of 2 years. Batteries can be charged via a USB port or external AC/DC adaptor. The controlled charging process ensures optimal battery status and extended operation time.

PM-212-SI3 Pocket optical power meter USB probe

The PM-212-SI3 optical power meter is a small, pocket size low cost tester. The small size does not prevent the optical meter fulfilling all technical requirements for field equipment. The tester can be used as pocket power meter or as USB probe, part of testing workstation. The tester is equipped with 3.6 mm Si photodetector, working area 13 mm2 designed for measurement of multimode  fibers. The input interface is equipped with changeable ASP adapters, which allow connection of wide range multimode connectors. The standard tester is designed for measurement at 850/980 nm, extended wavelength range 850/880/910/940 nm is available.

The Li-Pol rechargeable battery ensures long term working time with a minimum life time of 2 years. The unit is able to store 100 measurements which can be uploaded to PC and evaluated with SmartProtocol software or Data Exporter.

PM-212-CWDM Pocket optical power meter USB probe

The PM-212-CWDM optical power meter is a small, pocket size low cost item. The small size does not prevent the optical meter fulfilling all technical requirements for field equipment. The tester can be used as pocket power meter or as USB probe, part of testing workstation. The unit can be easily carried in the pocket or on the belt. It allows simultaneous measurement of full CWDM band with 2 extra wavelengths for MM applications (850 and 1300 nm) and 1625 nm for SM. The Li-Pol rechargeable battery ensures long term working time with a minimum life time of 2 years. The unit is able to store 100 measurements which can be uploaded to PC and managed with SmartProtocol software or Data Exporter.

PM-212-SN-GE Multifiber optical power meter

The PM-212-SN-GE optical power meter is designed to measure absolute or relative optical power in optical networks terminated with duplex SN connectors. Because of use the large scale Ge photodiode the tester can measure overall optical power level from both fibers of SN connectors in wide wavelength range.
The memory capacity allows storage and uploading of up to 100 measurements including memory position or fiber number, wavelength, absolute value or relative value and insertion loss. The SmartProtocol PC evaluation software supports memory download, test report generation and Data Exporter for data download to Excel sheet.
The rechargeable battery ensures long term working with a minimum service life of 2 years. Batteries can be charged via a USB port or external AC/DC adaptor. The microprocessor controlled charging process ensures optimal battery status and extended operation time.

PPM-212 Pocket optical power meter USB probe

The PPM-212 optical power meter – USB probe is a small, compact tester without display and
battery. The tester is designed to be used as USB probe, part of testing workstation. The small size does
not prevent the optical meter fulfilling all technical requirements.
The tester is equipped with USB interface. It ensures power supply, data reading and transferring
into data processing SW.
Standard optical interface is equipped with FC/PC adapter, which ensures proper connection of testing
cable. It might be easily changed by universal 2.5/1.25 μm ferrule or any commonly used type.
The multicolor LED is signalizing power supply, absolute (dBm) or relative (dB) measuring mode.

LS-215E Pocket optical light source

The LS-215E optical Light Source is a compact and cost-effective device that meets all essential technical requirements for field equipment. It operates at wavelengths of 850/1300 nm for multimode or 1310/1550 nm for single mode applications. The rechargeable battery ensures prolonged operation with a minimum lifespan of 2 years. The batteries can be conveniently charged using a USB port or an external AC/DC adaptor.
The versatile output port facilitates the simple integration of commonly used optical adapters (FC, SC, or ST) in telecommunications, data, and industrial networks. This output port is specifically designed for the connection of connectors with a PC polished finish.
The LS-215E light source can collaborate with the PM-215E, which shares the same compact design as the smallest optical power meter. Together, they enable the measurement of insertion loss and the assessment of power budget in optical networks. The tester comes equipped with a USB port for convenient battery charging.