OPTOKON

Datové sítě - SFP moduly, aktivní prvky

OPTOKON nabízí cenově efektivní a snadno použitelná zařízení a prvky pro moderní optické datové sítě. Široký sortiment našich produktů poskytuje vysoký výkon a mimořádnou spolehlivost. Produkty pro datové sítě jsou speciálně navržené tak, aby pomohly společnostem zlepšit poměr cena výkon a zlepšit správu dat ve virtualizovaných prostředích.

QSFP CWDM Transceivers S40-QP-LR4-D

The S40-QP-LR4-10-D is designed to operate over single-mode fiber system using 4x10G CWDM channel in 1310 band and links up to 10km. The module converts 4 inputs channel of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data

QSFP Transceivers M40-V85-QP-SR4-XX-D

The M40-V85-QP-SR4-XX-D is designed to operate over multi-mode fiber system using 4x10G channels in 850 nm. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4. The optical transmitter portion of the transceiver incorporates a 4-channel VCSEL (Vertical Cavity Surface Emitting Laser) array, a 4-channel input buffer and laser driver, diagnostic monitors, control and bias blocks. For module control, the control interface incorporates a Two Wire Serial interface of clock and data signals. 

QSFP CWDM Transceivers S40-QP-LR4-XX-D

The S40-QP-LR4-XX-D is designed to operate over single-mode fiber system using 4x10G CWDM channel in 1310 band and links up to 30km. The module converts 4 inputs channel of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.

Active Optical Cable – 40 Gbs QSFP+

Products developed the QSFP+ Active Optical cable to provide an affordable, high-performance, low power approaches when connecting point-to-point or rack-to-rack. Parallel AOC are using full duplex 4 channel 850nm VCSEL technology. The QSFP+ to QSFP+ AOC provide data rates of up to 40 Gbps (Up to 11.1Gbps data rate per channel). Maximum link length is 300m links on OM3 multimode fiber.
AOC is electrically hot-pluggable compliant to SFF-8431, QSFP+ MSA and RoHS. Power dissipation < 1.5 W (per cable end).