OPTOKON

SC Patchcord

The OPTOKON SC patchcords are manufactured according to JIS, IEC, EIA/TIA and ANSI specifications for intermateability and optical performance. The SC patchcords are offered for both SM applications, with PC and APC polishing method. All OPTOKON connectors now come with the laser printed OPTOKON logo and patchcord cables are produced by OPTOKON Kable factory and have a LSZH (Low Smoke Zero Halogen) cable jacket, are 0.9 mm Easy Strip buffer type and bend insensitive ITU-T G.657.A2 fiber. Customized patchcord cable diameter and color according to demand is available. Set of twelve colored pigtails are packed in a plastic bag, individually tested (label with test results and product description on bag) and come with a lifetime guarantee. 

FC Patchcord

The patchcords with FC connector type are designed and manufactured according JIS, IEC, EIA/TIA and ANSI specifications for intermateability and optical performance. The FC connectors are offered for MM or SM applications, with PC and APC polishing method.

ST Patchcord

The ST connector type patchcords are offered for MM or SM applications with PC polishing method. Various boot color combinations allows to specify duplex straight or crossed interconnection cable and M5 (50/125 µm) or M6 (62.5/125 µm) fiber type.

LSH Patchcord

The LSH connector patchcords are offered for MM or SM applications with PC and APC polishing method. LSH integrated protective cap made from zinc alloy protects ferrule from dust and rules out any laser light emissions. The LSH connector is compatible with E2000TM connector standards. High power version available.

D4 Patchcord

The D4 connector type patchcords are offered for SM applications with UPC – ultra PC polishing method. Two boot dimensions allow to use both cable or fiber diameters.

DIN Patchcord

The one piece DIN connectors feature a single unit body with spring-loaded free-floating zirconia ceramic ferrule. This unique connector offers superior performance in a compact, DIN 47256 compatible design suitable for a variety of applications. The DIN connectors are manufactured with a precision screw machined brass for consistent performance and durability.

The DIN connectors are available in either single or multimode and are fully intermateable with DIN 47256 type products. Both the singlemode and the multimode connectors use a zirconia ceramic ferrule featuring a pre-polished "PC" profile with an enhanced convex spherical end. This allows fast polishing of the fiber and enables the installer to achieve low optical loss with high perfor¬mance physical contact and ensuring maximum repeatability.
 

ESCON Patchcord

ESCON Series duplex fiber optic interconnect products are fully compatible with ESCON I/O interfaces as defined in IBM document SA22-7202-00. The Enterprise Systems Connection Architecture ESCON is a channel interconnection environment developed by IBM to take advantage of fiber media and dynamic connectivity. ESCON connector is available in singlemode and multimode versions. 

FDDI Patchcord

The FDDI connector features a sliding keyway which is integrated into the connector body. The keyway is indexed to achieve the prescribed FDDI keying positions. Key positions A and B are used with dual attach stations. M and S keying positions are used when a network concentrator is connected to a single attached station. M key is inserted at the concentrator and the S key at the station end. The type S or “slave” key position will mate with any connector regardless of key style.

SMA Patchcord

SMA connectors are specially designed for multimode data communication applications. SMA connectors are fully compatible with existing SMA hardware.

LC Patchcord

The innovative LC design offers a form factor one-half the size of current industry standards, and simple features create a new definition of user-friendliness.
The LC connector is manufactured to meet EIA/TIA 568A, FOCIS 10, IEC 61754-20 and IEC 11801 specifications for optical performance and intermateability. The LC Duplex fits into the RJ-45 standard cutout and uses the smallest diameter cable jacket in the industry.
 

LX.5 Patchcord

The industry's most reliable small-form-factor fiber optic connector. Doubling capacity is easy with the LX.5. By allowing two fibers instead of one to fit into the standard SC adapter footprint, the LX.5 doubles the density of fiber termination equipment. The LX.5 was developed with carrier-class reliability to ensure network integrity. Available in simplex or duplex configurations, the LX.5 maintains single circuit access and incorporates safety shutters on both the connector and adapter body to provide protection from dust, dirt, and ferrule end-face handling damage. The connector also features a latching mechanism that effectively releases the connector from the adapter. Its user-friendly and intuitive design prevents cables from snagging at the back of the connector.

MU patchcord

The MU high density fiber optic interconnection system offers a new solution for high performance telecommunications networking. The MU connector is at least half the size of the standard SC connector. It can offer twice the port density, but all the optical performance of traditional fiber optic connectors. The MU system includes a complete range of multimode and singlemode.

MTP Patchcord

The MTP patchcord provides quick connection specifically for multifiber cable, up to 24 fibers.  The MTP connectors are designed for termination of ribbon fiber or loose individual fibers. Connection integrity is provided by the spring action side latch housing and alignment is achieved with high precision guide pins. The housing are colored-coded to differentiate single mode and multimode. Removable housing allow for quick change of pin clamps, ferrule cleaning or connector repolishing. Available MTP trunk cables or fan-out from MTP to single fibers connectors: LC, SC, etc.

MT-RJ Patchcord

The MT-RJ connectors are designed to bring together the latest advances in precision molding and multi-fiber ferrule technology, providing the end user with an optical interface that is easier and more cost effective to install. At half the size of comparable duplex SC connectors, yet using the same space in patch panels and networking equipment as RJ-45 copper connectors, the MT-RJ connector doubles the capacity of existing networking infrastructures.

Master Patchcord

We offer an extensive range of pre-terminated cable assemblies that are 100% tested to ensure conformance with your specifications.  These assemblies are used for measuring and manufacturing of fiber optic components and optical network testing.
The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is specified with its Serial Number on connector body, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available. 
 

Master LSH Patchcord

We offer an extensive range of pre-terminated cable assemblies that are 100% tested to ensure conformance with your specifications.  These assemblies are used for measuring and manufacturing of fiber optic components and optical network testing.

The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.

Master SC Patchcord

We offer an extensive range of pre-terminated cable assemblies that are 100% tested to ensure conformance with your specifications.  These assemblies are used for measuring and manufacturing of fiber optic components and optical network testing.

The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.

Master FC Patchcord

We offer an extensive range of pre-terminated cable assemblies that are 100% tested to ensure conformance with your specifications.  These assemblies are used for measuring and manufacturing of fiber optic components and optical network testing.

The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.

 

 

Master LC Patchcord

We offer an extensive range of pre-terminated cable assemblies that are 100% tested to ensure conformance with your specifications.  These assemblies are used for measuring and manufacturing of fiber optic components and optical network testing.
The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.