3G-SDI Video SFP Optical Transceiver Module is a high-performance, cost-effective 3G-SDI optical transceiver module for broadcast video transmission applications over single-mode fiber (SMF). It is specifically designed for robust performance in the presence of SDI pathological patterns for SMPTE 259M, SMPTE 344M, SMPTE 292M, and SMPTE 424M serial rates. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472 and provide the maximum transmission distance of 20km over single mode fiber at 3 Gbps pathological signals. The Pin definition of OHP3G-3110DCR is MSA compliant.
S3SDI-D31-LP-LX-D 3 Gbps SDI video SFP transceiver
S3SDI-D31-SP-LR-D provides extensive operational status monitoring (also called DDM) through an I2C interface. Output optical power, bias current, supply voltage and operating temperature are monitored. If a parameter monitored is outside the pre-defined range, the alarm flag associated with the parameter will be raised. The 3G SDI video SFP module is Class I Laser products per FDA/CDRH and IEC-60825 standards.
- Universal Video SFP Transceiver
- Speed from 270 Mbit/s up to 2.97 Gbps
- Metal enclosure for Lower EMI
- Hot-pluggable SFP footprint
- 1310 nm DFB laser transmitter
- Support video pathological patterns for SD-SDI, HD-SDI, 3G-SDI
- 3G SDI protocol support for broadcasting applications
- Duplex LC connector interface
- Digital Diagnocstic Monitoring (DDM)
- Case operating temperature range: 0°C to 70°C
- Single 3.3 V power supply
- Compliant with SFF-8472 standards, duplex LC connector
- Compliant with SFP MSA
- RoHS Compliant (lead free)
Recommended operating conditions:
| Parameter | Symbol | Unit | Min. | Max. |
|---|---|---|---|---|
| Operating Case Temperature | Tc | °C | 0 | +70 |
| Power Supply Voltage | Vcc | V | 3.13 | 3.47 |
| Power Supply Current | Icc | mA | 300 | |
| Typical Data Rate | Gbps | 3 | ||
Optical specifications:
| Transmitter | ||||||
|---|---|---|---|---|---|---|
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Center Wavelenght Range | λc | 1260 | 1310 | 1360 | nm | |
| Average Output Power | Pout | -5 | 0 | dBm | 1 | |
| Single Mode Suppression Ratio | SMSR | 30 | dB | |||
| Spectral Width (-20dB) | λ20 | 1 | nm | |||
| Receiver | ||||||
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Center Wavelenght Range | λc | 1260 | 1580 | nm | ||
| Receiver Sensitivity SD, HD, 3G | -16, -15, -14 | dBm | 2 | |||
| Receiver Overload | -3 | dBm | 2 | |||
| LOS De-Assert | LOSd | -22 | dBm | |||
| LOS Assert | LOSa | -30 | dBm | |||
Note 1- The optical power is launched into SMF
Note 2- Measured with a pathological data pattern
- High-density digital video routers & switches
- HD Camera or Monitor System
- 3G-SDI/HD-SDI/SD-SDI Electrical-Optical and Optical-Electrical Converter
ACT_18-25_EN-3G-SDI-SFP-01
