The IMC-2M series is a family of Web Smart OAM/IP-managed Gigabit Ethernet switches and converters that support 10/100/1000Base-T to 100/1000Base-X fiber Ethernet connections. Using a Web browser, the in-band network allows for easy control and configuration of each Ethernet port.
The IMC-2M Ethernet switch/converter offers SFP-SC fiber cabling connectors, with both single-mode and multi-mode models available, including Bi-Di models that enable bi-directional transmission using a single fiber cable. Auto-negotiation is supported for both half-duplex and full-duplex signals in accordance with IEEE 802.3u standards. The switch is equipped with LED indicators to signal the power status of the switch, UTP port speed, link and duplex status, and FX port link and duplex status.
IMC-2M Managed 10/100/1000Base-T to 100/1000Base-X SFP GbE converter
- 10/100/1000Base-T to 100/1000Base-X SFP Ethernet Switch
- Auto-Cross over for MDI/MDIX in TP port
- Auto-Negotiation or Manual mode in TP port
- Supports flow control Enable or Disable
- Supports Jumbo Frame 16K Packet
- Ingress/Egress Bandwidth control
- Supports IEEE 802.3ah OAM management
- Supports SNMPv1
- Digital Diagnostic (DOM) SFP Support
- Supports Store-and-Forward Switching
- Dying gasp (remote power failure detection)
- Supports Link Fault Pass-Through ( LFPT ) Function
- Supports Auto Laser Shutdown (ALS) Function
- USB console port and Web management
- Supports On-Line F/W upgrade (local) by the Web manager
- Supports 16 Tag VLAN Groups
- RMON counters
- Wall and DIN rail Mountable
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, 802.3z, 802.1Q |
|---|---|
| RJ-45 interface | 10/100/1000Base-T, Half/Full duplex |
| Data rate: 10Mbps, 100Mbps, 1000Mbps | |
| Cable: 10Base-T Cat.3, 4, 5, UTP | |
| 100Base-TX cat.5, 5e or higher | |
| Optical interface¹ | 100/1000Base-X, Duplex SC, SFP |
| Data rate: 125/1250 Mbps | |
| Full duplex mode | |
| Jumbo Frame | 16K Bytes |
| Fiber parameters | Multimode: 50/125 µm, 62.5/125 µm, Single mode: 9/125 µm |
| Wavelength: 1310 nm – Multi mode/Single mode | |
| 1310Tx/1550Rx (Type A) - WDM | |
| 1550Tx/1310Rx (Type B) - WDM | |
| Available distance: 500 m, 2 km (Multi mode) | |
| 20/40 km (Single mode) | |
| SFP, Distance depends on plug-in Fiber Transceiver | |
| Link Fault Pass through (LFPT) | TX→Fiber: If TX port link down, the media converter will force Fiber port to link down |
| Fiber→TX: If Fiber port link down, the media converter will force TX port to link down | |
| LED indications | Power, FX-Link, LAN Speed, LAN Link |
| Power Input | DC 12 V |
| Power Consumption | < 3W |
| Operating Humidity | 10 - 90% non-condensing |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -10°C to +70°C |
| Dimension (WxDxH) | 96.5×23×73.4 mm |
| Weight | 120 g |
| Installation | Desktop or Wall Mounting (optional) |
| EMC Certification | FCC, CE |
| MTBF | >65 000 hrs |
Note: 1) Optical interface – 100/1000 Mbps in case of dual rate SFP
ACT_10-26_EN-IMC-2M
